Ostendorf Kunststoffe HT-Safe EA té-réduit 45° polypropylène D 110/50 mm gris
| SKU | Naam | Brutoprijs | Aantal | Eenheid | ||
|---|---|---|---|---|---|---|
| 20013865 |
Ostendorf Kunststoffe HT-Safe EA té-réduit 45° polypropylène D 110/50 mm gris
|
Centrale voorraad:
|
TEC Brussel:
|
|
|
|
| 20019237 |
Ostendorf Kunststoffe HT-Safe EA té-réduit 45° polypropylène D 110/75 mm gris
|
Centrale voorraad:
|
TEC Brussel:
|
|
|
|
| 20013870 |
Ostendorf Kunststoffe HT-Safe EA té-réduit 45° polypropylène D 125/110 mm gris
|
Centrale voorraad:
|
TEC Brussel:
|
|
|
|
| 20039450 |
Ostendorf Kunststoffe HT-Safe EA té-réduit 45° polypropylène D 160/110 mm gris
|
Centrale voorraad:
|
TEC Brussel:
|
|
|
|
| 20013854 |
Ostendorf Kunststoffe HT-Safe EA té-réduit 45° polypropylène D 50/40 mm gris
|
Centrale voorraad:
|
TEC Brussel:
|
|
|
|
| 20013857 |
Ostendorf Kunststoffe HT-Safe EA té-réduit 45° polypropylène D 75/50 mm gris
|
Centrale voorraad:
|
TEC Brussel:
|
|
|
|
| 20013859 |
Ostendorf Kunststoffe HT-Safe EA té-réduit 45° polypropylène D 90/50 mm gris
|
Centrale voorraad:
|
TEC Brussel:
|
|
|
|
| 20013860 |
Ostendorf Kunststoffe HT-Safe EA té-réduit 45° polypropylène D 90/75 mm gris
|
Centrale voorraad:
|
TEC Brussel:
|
|
|
Hieronder kan u alle informatie vinden over het geselecteerde artikel:
SKU: 356861
Leveranciers-referentie: 175220-05
Beschikbare verpakkingen
Om uw opslag te vergemakkelijken, bieden wij de mogelijkheid om een andere verpakking te ontvangen.
In 95% van de gevallen zal deze verpakking gerespecteerd worden.
Echter, incidentele logistieke beperkingen kunnen aanpassingen vereisen.
| Aantal | Eenheid |
|---|---|
| 1 | Pièce |
| 20 | Carton |
Ostendorf Kunststoffe. HT-Safe PP. Té-réduit 45° avec joint à lèvres triple, breveté. Plus facile à installer et plus fiable , formule du PP-H autoextinguible selon DIN 4102 (classe de feux B1) et DIN EN 1451-1. Couleur RAL 7043. Inventé et réalisé en Allemagne avec 25 ans garantie. Application: drainage pour l'intérieur des bâtiments comme: tuyaux d'eaux usées, tuyaux d'eaux pluviales, et tuyaux de ventilation (voir aussi les domaines d'application selon: DIN 1986-4). Marquage tuyaux et raccords: Marquage permanent avec étiquette du fabricant, diamètre nominal, standard (DIN EN 1451-1), date de production, matériaux, classe de matériaux de construction. (comportement au feu) (les raccords portent aussi une indication de l'angle nominal).
Raccord à 3 voies
| Matériau raccordement 1 | Polypropylène |
| Matériau raccordement 2 | Polypropylène |
| Matériau raccordement 3 | Polypropylène |
| Modèle | Pièce Y |
| Réduit | Oui |
| Diamètre nominal raccordement 1 | DN 110 |
| Diamètre extérieur du tube raccordement 1 | 110mm |
| Raccordement 1 | Insert |
| Diamètre nominal raccordement 2 | DN 50 |
| Diamètre extérieur du tube raccordement 2 | 50mm |
| Raccordement 2 | Manchon enfichable |
| Diamètre intérieur nominal raccordement 3 | DN 110 |
| Diamètre extérieur raccordement 3 | 110mm |
| Raccordement 3 | Manchon enfichable |
Technische fiches
| F356712f | Download |